ZR SERIES

The BC Racing ZX Series offers the highest level of adjustability within the BC Racing coilover system to date. Designed specifically for racing and track use, the ZX Series features 3-way adjustable damping force, providing 20 clicks of low-speed compression, 12 clicks of high-speed compression, and 30 clicks of rebound adjustment. The ZX Series adopts an upright cylinder design, allowing for the possibility of replacing the upper mount, while combining the excellent characteristics of the DS and ER series. Coupled with ultra-high viscosity index racing shock fluid, the ZX Series can maintain outstanding performance on the track and in drifting competitions for extended periods.

Digressive Piston And Damping Curve
Ultra-high Viscosity Index Full Synthetic Shock Fluid
Mono-tube
3-way Adjustable Damping Control
30 Clicks Of Rebound Adjustment
20 Clicks Of Low Speed Compression Adjustment
12 Clicks Of High Speed Compression Adjustment
Dual Piston Design
Track-oriented Setup
Custom Spring Rates
1-year Warranty Against Manufacturers Defect
Noise From Track-oriented Products Such As Ds, Rm, Er, Hm, Zr Or Zx Coilovers Is Not Covered By Warranty
Fully Rebuildable

On cars with McPherson struts, the ZR Series comes standard with an inverted mono-tube damper. The damper has a steel braided line exiting the top of the damper leading to the external reservoirs that can be remotely mounted on the chassis for easy adjustment. Cars with Double A-Arm suspension come with upright dampers. These dampers have steel braided lines or solid stems that exit the damper at the bottom and lead to the external reservoir that can be mounted under the chassis or on the shock body itself.

*Not all vehicles allow for inverted front and rear dampers. In such cases an upright mono-tube damper will be supplied. The braided line/hard stem for the external reservoir exits the base of the damper when not inverted. Please note that not all vehicles use camber plates in the front and/or rear. In such cases pillowball top mounts are supplied in place of camber plates on HR & ZR Series Coilover Systems.